Gas Filtering
Gas filtration parts are crucial components in filtration systems designed to remove impurities and contaminants from gases. These parts encompass various elements, such as filters, cartridges, and coalescers, ensu...
Categories in Gas Filtration Parts - Gas Purification Solutions (2)
Gas Filters
Gas filters are essential components in gas processing and filtration systems, designed to remove impurities, particulates, and contaminants from gases. These filters ensure that the processed gases meet the required purity and quality standards, making them vital for various industrial applications.
Dryers
Gas filtering dryers are devices used to purify and dry gases by removing contaminants such as moisture, oil, and particulates. Gas filtering dryers ensure the cleanliness and quality of gases used in industrial processes, laboratories, and medical applications. They employ filtration and drying techniques to enhance gas purity, prevent equipment corrosion, and maintain optimal performance and reliability in critical gas handling systems. Browse our selection below or contact us to speak to a product expert.
Filters
Filters
37 RESULTS
content loaded
MPN:80-1322
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$14,750.30
Loginto your account
MPN:80-1323
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$15,345.31
Loginto your account
MPN:CLS112-10K
CLS112-10K, KIT FFC-112 FILTER ELEMENT
MPN:CLS112-6K
CLS112-6K, KIT FFC-112 FILTER ELEMENT
MPN:DLS113-10K
DLS113-10K, KIT FFC-113 FILTER ELEMENT
MPN:DLS113-6K
DLS113-6K, KIT FFC-113 FILTER ELEMENT
MPN:FFC-110-10
FFC-110-10, 1/4 NPT NATURAL GAS FILTER
MPN:FFC-110-6
FFC-110-6, 1/4 NPT NATURAL GAS FILTER
MPN:FFC-110L-10
FFC-110L-10, 1/2 NPT NATURAL GAS FILTER
MPN:80-1322
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$14,750.30
Loginto your account
MPN:80-1323
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$15,345.31
Loginto your account
MPN:CLS112-10K
CLS112-10K, KIT FFC-112 FILTER ELEMENT
MPN:CLS112-6K
CLS112-6K, KIT FFC-112 FILTER ELEMENT
MPN:DLS113-10K
DLS113-10K, KIT FFC-113 FILTER ELEMENT
MPN:DLS113-6K
DLS113-6K, KIT FFC-113 FILTER ELEMENT
MPN:FFC-110-10
FFC-110-10, 1/4 NPT NATURAL GAS FILTER
MPN:FFC-110-6
FFC-110-6, 1/4 NPT NATURAL GAS FILTER
MPN:FFC-110L-10
FFC-110L-10, 1/2 NPT NATURAL GAS FILTER