Differential Pressure Gauge Accessories - Sensocon®

Cable Gland S2221 is a liquid tight PG-21 cable connector for 0.354-0.603" diameter cable. This is commonly used along with the A-101 Weatherproof Cover for Series A gauges and controls. (SERIES A)

1/4" OD Vinyl Tubing for use with S2000 barbed fittings. Sold as 5ft length. (SERIES S2000)

Weatherproof Cover / Surface Mount Bracket is an accessory for the Series A family of products. The Series A has been designed to meet NEMA 4X standards when installed with the Weatherproof Gauge Cover, included gasket, and appropriately connected with a 3/4" or PG-21 Cable Gland conduit connection. The Weatherproof Cover also allows any Series A gauge or control to be surface mounted with the included hardware. (SERIES A)

Hanging Bracket / Stand is an L-bracket with a hanging hole and a 3 hole bolt pattern. This bracket allows for mobile use of the S2000 differential pressure gauge. (SERIES S2000)

Surface Mounting Plate is an aluminum surface mounting bracket for the Series S2000. (SERIES S2000)

Air Filter Gauge Kit converts any S2000 into an air filter gauge. The kit includes an aluminum (A-103) surface mounting bracket with screws, (2) (A-131) brass static pressure tips, (2) (A-202/A-203) shut off valves and (2) (A-024) 5 ft lengths of 1/4" OD vinyl tubing. (SERIES S2000)

Brass Static Pressure Tip with Barbed Connection is a brass barbed static pressure tip for 3/16" and 1/8" ID tubing with a 1/8" NPT. This pressure tip comes with 2 washers and a nut. (SERIES S2000)

90° Rubber Fitting for 3/16" ID push on tubing. (SERIES A)

Short Shut Off Valve is a plastic shut off valve that has a short 1/4" length brass end with a 3/16" NPT connection and a second end with a push in connector for 1/4" (6mm) O.D. tubing. (SERIES S2000)